Talk:Variables and Properties

Conditional properties

What does it actually mean if a property is "conditional"? I'm assuming this means I can access it through conditions in spells and such, is this right? Fowl 20:24, 7 February 2012 (EST)

The conditional keyword seems to be described here - Papyrus Introduction: Writing Custom Functions

It's hardly the most obvious place, however. Perhaps the keyword reference should be expanded?

-- Cipscis 20:29, 7 February 2012 (EST)

That's awesome, thank you. I'm going to add that link to the article Fowl 19:13, 8 February 2012 (EST)

Manipulating Properties

I can't seem to get the referencing. I'm in an active magic effect (AME) script wanting to add/subtract on an Int property attached to a quest script. I have a quest property (called QST) attached to the AME script whose value is the quest whose Int property I want to manipulate. But doing a line like (from within the AME script):

QST.IntProperty += 1

just gives a compile error saying that the quest doesn't have property "IntPropery." So, I'm thoroughly confused. I don't completely understand "casting," either. That may have something to do with it. --Doulos 04:53, 11 February 2012 (EST)

You're absolutely right that casting has something to do with it. The problem is, as the compiler tells you, that "IntProperty" doesn't exist on the type "Quest".

The important thing to remember here is that, when you wrote the script containing "IntProperty", you wrote it such that you extended "Quest". What' you've essentially done is create a new object type that is an extension of "Quest" and, as such, I expect you should be able to access your property like this (with "MyNewQuestScript" as a placeholder for the name of the script containing "IntProperty"):

(QST as MyNewQuestScript).IntProperty += 1

-- Cipscis 05:35, 11 February 2012 (EST)

Thanks for the reply, it worked! I think I'm getting more of a handle on the idea, but I'm still having some conceptual problems. So, if I understand it right, when I made a new Quest script on a quest that extends "quest," I can only use the stuff in the "quest" object. Then, if I make a AME script with a property whose value is MyQuest, I really only have a property that uses stuff from the "quest" objects. So, in order to use objects specifically from MyQuest, I have to have to cast the AME property as MyQuestScript? Why MyQuestScript and not just MyQuest? Thanks, --Doulos 14:17, 11 February 2012 (EST)

Ah, I think I figured it out. I'll keep all of this up here in case someone else might benefit from it. I'm so used to Oblivion and how quests own variables. So I was assuming that I should be able to something like MyQuest.IntProp. But that's not the case. I have to attach a quest property (value MyQuest) to my AME script because that's the quest wherein the variable of interest lies. However, the property "IntProp" doesn't belong to MyQuest, it belongs more specifically to the script to which it it attached. So, if I want to use the properties of MyQuest, I have to cast the QST property as MyQuestScript, since the script contains the property I want. --Doulos 14:49, 11 February 2012 (EST)

---

I am trying to do something similar to above working with a script on an ActiveMagicEffect trying to access a property or rather properties from a QuestScript but I'm having difficulty with compiler errors Ive tried as suggested above to point to my property in the quest script in this way.

If (HasHastenDead as PsiNecromancyQuestScript).Intproperty == 1

But I just get an Error "cannot compare a psinecromancyquestscript to a int (cast missing or types unrelated)" And Error "cannot cast a int to a psinecromancyquestscript, types are incompatible"

It may have something to do with me declaring the property incorrectly I was under the impression that you declared or referenced a property from another script as

            PsiNecromancyQuestScript Property HasHastenDead auto

But I just get another compiler error "cannot compare a psinecromancyquestscript to a int (cast missing or types unrelated)"

And it doesn't work to declare the property as normal either.

            int Property HasHastenDead auto

Any help on this would be greatly appreciated.

--PsiSoldier 14:09, 21 April 2012 (EDT)

Correct way:

PsiNecromancyQuestScript Property PsiNecromancyQuest Auto

;;;

if PsiNecromancyQuest.HasHastenDead == 1

Alternatively:

Quest Property PsiNecromancyQuest Auto

;;;

if (PsiNecromancyQuest as PsiNecromancyQuestScript).HasHastenDead == 1

--Fg109 14:34, 21 April 2012 (EDT)

Excellent. That worked great! Thanks Fg109 --PsiSoldier 16:11, 21 April 2012 (EDT)

"Warnings" Unclear

At the moment, the "Warnings" at the bottom of the page reads like this:

"Be careful with variables and auto properties on scripts that are extended by other scripts - especially where some script somewhere else may have a property pointing to the base script, or trying to cast to the base script. This is because it would be possible to have two copies of a script attached to the same object, thereby creating two copies of the variable/auto property - and the other scripts that refer to the base script may randomly pick which one to talk to.

This is doubly-true of scripts with native functions, as the game can attach these to in-game objects at any time if it needs to, thereby creating another copy of the variable or auto property."

To me, at least, this seems rather unclear. Could anyone help me decipher it?

-- Cipscis 17:27, 14 February 2012 (EST)

Getting Properties From Any Other Script

This section has caused a bit of confusion for some. They followed the magicEffect -> QuestScr example of declaring their custom script type, but things didn't work. Unlike the quest, some objects will have multiple instances. So their reader script had a property referring to the script on some base object. The same principles apply, but it would first involve grabbing a world reference and casting to the Type.

I'm not sure if there is already a page explaining that. -- Tunaisafish 08:17, 17 March 2012 (EDT)

---

Yes I am having difficulty passing variables between my scripts and getting values that actually work that I can do something with. I am trying to pass values from my Quest Script to my Active Magic Effects script and while they both compile correctly I do not get any results that I expect. The Quest is configured correctly and is advancing as it should and I even get my debug message that shows the script SHOULD be working but I'm not able to pass my property values from one script to the other. Currently my scripts look like this.

This is my Quest Script that should be assigning the variables and hopefully passing them along. Ive tried playing around with Globalvariable instead of Int but that didn't seem to be of any help unless I just did it incorrectly.

Scriptname PsiNecromancyQuestScript extends Quest  

Int Property PsiUpkeepcharge  auto
Int Property PsiHasHastenDead auto
Int Property PsiHastenDeadHealthBonus auto
Quest Property PsiNecromancyQuest Auto
Float CheckonceA



Event OnInit()
	PsiUpkeepcharge = 30
	while PsiNecromancyQuest.Getstage() < 10000
          	If PsiNecromancyQuest.GetStage() == 150
			If CheckonceA == 0
				PsiHasHastenDead = 1
       	    	                PsiHastenDeadHealthBonus = 40
				Debug.Messagebox("Player Has Gained the Hasten Dead Bonus")
			        CheckonceA = 1.0
			Endif
		Endif
	EndWhile

EndEvent

Trying to pass my Properties to my Active Magic Effects Script here..

Scriptname PsiSummonScript extends activemagiceffect  

PsiNecromancyQuestScript Property PsiNecromancyQuest Auto

float Checkonce1


Event OnEffectStart(Actor Target, Actor Caster)
	if Checkonce1 == 0
		Game.GetPlayer().ModActorValue("Magicka", - PsiNecromancyQuest.PsiUpkeepcharge)
		Checkonce1 = 1.0
        	Debug.Messagebox("Player Charged Magicka Upkeep!")
		if PsiNecromancyQuest.PsiHasHastenDead == 1
			Target.ModAv("Health", PsiNecromancyQuest.PsiHastenDeadHealthBonus)
        		Debug.Messagebox("The Summon Has been buffed!")
		Endif
	Endif
EndEvent

Event OnEffectFinish(Actor Target, Actor Caster)
	Game.GetPlayer().ModActorValue("Magicka", PsiNecromancyQuest.PsiUpkeepcharge)
	Checkonce1 = 0
       	Debug.Messagebox("Player No longer Charged Magicka Upkeep!")
		if PsiNecromancyQuest.PsiHasHastenDead == 1
			Target.ModAv("Health", - PsiNecromancyQuest.PsiHastenDeadHealthBonus)
		Endif
EndEvent

So I'm guessing either what I want to do is not possible or obviously there is something here I'm just not getting right. Would greatly appreciate some help!

--PsiSoldier 21:02, 21 April 2012 (EDT)